Polishing process of stainless steel cap

　　Medium polishing is to use a harder polishing wheel pair to further process the roughly polished surface. Stainless steel cap can remove the scratches left by the roughly polished surface and produce a smooth to medium bright surface. The roughness of the surface is between zero and several microns.

　　Rough polishing is the use of hard wheels on the head surface for grinding, polishing or grinding, so rough polishing is also known as grinding or grinding. stainless steel cap is mainly used to remove burrs, scratches, rust marks, oxide scales, sand holes, bubbles, weld nodules, welding slag and various macroscopic defects on the surface of parts to improve surface smoothness and reduce surface roughness.

　　Precision polishing is the last process of stainless steel cap polishing. Stainless steel cap is a method of machining the surface of parts with soft wheels coated with polishing paste. Because 2 Inch SCH10 ASTM A312 Stainless Steel Pipe Fitting Cap is carried out on the relatively flat surface, the roughness of the surface can be further reduced to achieve the purpose of micro-level, so that a very bright surface can be obtained, and the stainless steel cap polishing substrate has no obvious wear, the surface roughness can reach about 0.01 micron, can really achieve mirror surface light. Bright. Changhui produces large-scale oval head, small-caliber head, stainless steel cap, alloy steel cap and so on. It has been widely used in pharmaceutical, chemical, dairy, filtration, power, machinery and other industries and won the praise and trust of many users.